(MIG) Welding Cost Model

Estimate using this sample (MIG) Welding Cost Model found in Costimator

This (MIG) Welding cost model was designed using the Cost Modeler cost model design editor in Costimator cost estimating software.   It calculate s the time and cost to MIG weld two or more parts with just two input variables; weld size and weld distance. Based on these inputs the Cost Model will calculate the appropriate Travel Speed Per Inch, Total Cycle Time and Cost Per Piece.

Try it Now!




   
Weld Size: in clear
Weld Distance: in
Travel Speed Per Inch: min
clear
clear
Time per Piece: min
Cost per Piece:
   

 

There are over 300 cost models in Costimator. All ready for use or can be easily modified to more closely fit the specific or proprietary needs of your manufacturing environment.

Costimator Request Demo


A little bit about MIG Welding
Gas Metal Arc Welding, more commonly referred to as MIG (Metal Inert Gas) welding, uses a torch-style electrode attached to a spool of wire and a wire feeding mechanism. GMAW uses an electric arc between the work and the applied stock to generate heat for the weld pool. In GMAW systems, however, the torch maintains a standard distance from the work while a mechanism, typically mounted away from the torch on the power supply, feeds the weld material, in wire form, into the weld pool. As the tool standoff is constant, less effort is typically required to evenly apply a GMAW weld. GMAW eliminates the need to continually stop and replace electrodes since welding can continue as long as there is wire on the spool. Gas Metal Arc Welding, is the use of a constant flow of inert (non-reactive) gas around the weld pool. This is used to protect the integrity of the weld. The use of gas also makes for faster cleanup of the weld.

Back to Cost Models