Surface Grinding
The "Grinding Time" is calculated based on the material type and amount of stock removal and handling. Machining recommendations came from review of the "Machining Data Handbook", 2nd Edition.
User Input
1. Select the "Part Weight Range"
2. Enter the "Part Width to Grind"
3. Enter the "Part Length to Grind"
The Over Travel which is the distance on and off the part that the grinding wheel will move is set to 1. User can change this on the fly.
4. Enter the "Depth to Grind" (stock removal).
5. Select the "Material Group".
6. The program will calculate the Traverse Length and select the proper wheel width
7. The "Cross feed rough, finish and through feed" is calculated by the program.
8. The "Traverse Time" is calculated by the program.
9. The grinding time and handling time is calculated by the system.
Blog
LinkedIn
Facebook
YouTube
Twitter
