Holes, Inside Hole Grooves
This Cost Model (CM) is normally used for Prismatic and Cylindrical Type Parts.
This selection is for holes with grooves on the inside of the diameter.
User Input
1. Enter the "Groove Dia."
2. Enter the "Groove Depth"
3. Enter the "Number of Grooves"
Grooving Time based on the speeds and feeds residing in the database for the material selected. The process is:
Step 1: The Grooving Head enters the existing hole.
Step 2: The Grooving Head, which usually has a clutch and stop mechanism begins to start the grooving processing with the spindle of the machine turned on.
Step 3: Once the grooving is made to size, the tool retracts inward and then outward of the hole.
Wohlhaupter is one of the manufacturers of this special type of tool.
Blog
LinkedIn
Facebook
YouTube
Twitter
